|
Step By Step Instructions
1. Make sure the switch on the MedicTag is to the LEFT when holding the
MedicTag with the attaching hole upright. Moving the switch to the right locks
the unit making it "read only" to prevent accidental changes to your information.
2. Plug the MedicTag into a USB port. Your system should recognized that you
have plugged in the MedicTag and display a new icon in the task area at the
lower right of your screen. Depending on your computer system configuration the
MedicTag software menu should be displayed automatically. If it is displayed, go
to Step 6. Otherwise proceed to Step 3.
3. Double click on "My Computer" to show a list of your drives.
(If you do not have a "My Computer" icon on your desktop, click on "Start" then
click "My computer")
4. Double click on the "red cross" icon to access the MedicTag files.
5. Double click the AutoRun.exe icon to start the program.
6. From the menu click on "View Emergency Information".
7. Fill in your information as needed.
8. At the top, right corner of the form, click on the "X" to close the form. You
will be asked if you would like to save the changes. Click "Yes".
9. You can also save a backup copy of your information to your computer. Click
on "File" and then "Save As", in the dialog box that appears, navigate to your
desktop and then click on "Save".
10. In the menu click on "Exit" or the "X" in the upper right corner to close.
Removing the MedicTag from your computer depends on your operating system and
hardware.
On most systems that are "Plug and Play" you can simply unplug the MedicTag.
On others you must must turn off the device by clicking on the device icon in
the task area at the lower right of your screen and follow the instructions.
Click
HERE for Instructions text that you can print.
|
